User`s manual

6. System
AirLive SD-2020 User’s Manual 37
z Management DSCP
The class consists of HTTP traffic: Web browsing.
NOTE: To enable this function, please make sure the switches / routers in the
network support QoS.
3. SNMP
With Simple Network Management Protocol (SNMP) support, the IP Camera can be
monitored and managed remotely by the network management system.
- SNMP v1 / v2
z Enable SNMP v1 / v2
Select the version of SNMP to use by checking the box.
z Read Community
Specify the community name that has read-only access to all supported SNMP
objects. The default value is “public”.
z Write Community
Specify the community name that has read / write access to all supported SNMP
objects (except read-only objects). The default value is “write”.
- Traps for SNMP v1 / v2/ v3
Traps are used by the IP Camera to send massages to a management system for
important events or status changes.
z Enable Traps
Check the box to activate trap reporting.
z Trap address
Enter the IP address of the management server.