User`s manual

6. System
AirLive SD-2020 User’s Manual 35
z Use PPPoE
For the PPPoE users, enter the PPPoE Username and Password into the fields,
and click on the <Save> button to complete the setting.
- Advanced
z Web Server port
The default web server port is 80. Once the port is changed, the user must be
notified the change for the connection to be successful. For instance, when the
Administrator changes the HTTP port of the IP Camera whose IP address is
192.168.0.100 from 80 to 8080, the user must type in the web browser
“http://192.168.0.100:8080” instead of “http://192.168.0.100”.
z RTSP port
The default setting of RTSP Port is 554; the setting range is from 1024 to 65535.
z MJPEG over HTTP port
The default setting of MJPEG over HTTP Port is 8008; the setting range is from
1024 to 65535.
z HTTPS port
The default setting of HTTPS Port is 443; the setting range is from 1024 to 65535.
NOTE: Be aware to choose the different port from the one set for the web server
port.
- IPv6 Address Configuration
With IPv6 support, users can use the corresponding IPv6 address for browsing. Enable
IPv6 by checking the box and click on <Save> to complete the setting.
- DIPS ID
It’s a unique number of each device for identification and this ID is used for DIPS. This
function now is reserved for future use.