User`s manual

2. Package Contents and Installation
AirLive SD-2020 User’s Manual 11
3. Connect the external power supply to Camera (Optional)
Connect the power adapter to the AC power jack of the camera.
Once you have installed the camera well and powered it on, the power LED (orange)
will turn on later. When the power LED turned on, it means that the system is booting
up successfully. Furthermore, if you have a proper network connection and access to
the camera, the LAN LED (green) will flash.
Note: Use the 24VAC power adapter, which is Not included in the package, and
connect it to wall outlet for AC power.
2.4 Connect to IP Camera
1. Insert the bundle CD into your PC/Laptop.
2. Auto Run Screen then shows up; click “Install Software Æ “IPWizard II” to install the
configuration tool software.