User`s manual

9. Appendix:
AirLive SD-2020 User’s Manual 100
To avoid the setting process being disturbed by the camera’s tracking movement,
please click on the <Turn Off> button to switch off the tracking function.
NOTE: The Smart tracking function needs to be reactivated to take effect after saving
all the necessary settings. Please follow the steps below.
z Select <Off> under <Smart tracking> at the top.
z Click the <Save> button for confirmation.
z Select <On> under <Smart tracking> at the top.
z Click the <Save> button to confirm the settings.
z Enable tilt limit
Tick the box to enable the tilt limit setting.
z Get U Tilt / D Tilt
Please click and drag the PTZ pointer in the view window to the desired up or down tilt
position. Then click on the <Get U Tilt> / <Get D Tilt> button to get the boundary
values.
z Enable pan limit
Tick the box to enable the pan limit setting.
z Get L Pan / R Pan
Please click and drag the PTZ pointer in the view window to the desired left or right
pan position. Then click on the <Get L Pan> / <Get R Pan> button to get the boundary
values.
Save：Click on <Save> to confirm the settings.