User`s manual

4. Web Management
 ID (Group ID):
When you want to edit a VLAN group, you must select the Group ID field. Then, you will
enter Tag Base VLAN Group Setting or Port Base VLAN Group Setting page, which
depends on your VLAN mode selection.
 Member:
In modify function this is used to enable or disable if a port is a member of the new added
VLAN, “Enable” means it is a member of the VLAN. Just tick the check box (
) beside the
port x to enable it.
 Add Group:
Create a new port-based VLAN or tag-based VLAN, which depends on the VLAN mode you
choose in VLAN mode function.
 Delete Group:
Just tick the check box (
) beside the ID, then press the <Delete> button to delete the
group.
AirLive POE-GSH2004L-370 User’s Manual
35