User`s manual

2. Installation of the Switch

2.8 Reset to Default

When you forgot your IP or password, please use the mode (reset) button for the factory

default setting. Please take the following steps to reset the Web Smart Switch back to the

original default:

Step 1. Turn on the POE-GSH2004L-370.

Step 2. Press and hold the mode (reset) button continuously for 10 seconds and

release the mode (reset) button.

Step 3. The switch will reboot for 30 seconds and the configuration of switch will

back to the default setting.

Key in the user ID and the password to pass the authentication; the default ID and

Password is as below,

IP Address: 192.168.2.1

Password: airlive

AirLive POE-GSH2004L-370 User’s Manual