User`s manual

2. Installation of the Switch

2.2 Hardware Overview

2.2.1 Front Panel

The front panel of the web smart switch consists of 24 10/100/1000M Base-TX RJ-45 ports

and 4 100/1000M Combo SFP ports. The LED Indicators are also located on the front

panel.

 LED Indicators:

Comprehensive LED indicators display the status of the switch and the network (see the

LED Indicators chapter below).

 1000BASE-T Gigabit Ethernet Ports (Port 1~24)

The Switch four Gigabit twisted pair ports, supported auto negotiable 10/100/1000Mbps

and auto MDI/MDIX crossover detection function, this function gives true “plug and play”

capability, just need to plug-in the network cable to the hub directly and don’t care if the end

node is NIC (Network Interface Card) or switch and hub. These ports can operate in

half-duplex mode for 10/100Mbps and full- duplex mode for 10/100/1000Mbps.

24 10/100/1000Mbps RJ-45 ports are PoE enable ports. These PoE ports will be

automatically activated when a compatible terminal is identified, and the PoE port will

supply power to the connected PoE device.

AirLive POE-GSH2004L-370 User’s Manual