User`s manual

1. Introduction

3 AirLive AIRMAX2 User’s Manual

Universal Repeater AP + Client None Extend distance of any AP Router

WISP + Repeater

AP + Client Wireless WISP 2-Way CPE (One radio only)

AP Router AP LAN Port Broadband Sharing

WDS Station Bridge None Bridge with SSID

1.4.1 Access Point Mode

When operating in the Access Point mode, the AIRMAX2 becomes the center hub of the

wireless network. All wireless cards and clients connect and communicate through

AirMax2. This type of network is known as “Infrastructure network”. Other AirMax2 or

802.11a CPE can connect to AP mode through “Client Mode”.

1.4.2 Client Mode

This mode is also known as “Client” mode. For AirMax2, there are 2 types of Client modes:

Infrastructure and Adhoc mode. In Infrastructure mode, the AIRMAX2 acts as if it is a

wireless adapter to connect with a remote Access Point. Users can attach a computer or

a router to the LAN port of AirMax2 to get network access. This mode is often used by

WISP on the subscriber’s side.

Client Mode