User`s manual

9. Command Line Interface
73 AirLive AIRMAX2 User’s Manual
disp
off
allow
deny
add [mac]
delete [id]
clearall
[Mode] Wan Port
wan
clone [mac_addr]
dns [auto|manual]
static
[ip_addr <netmask>
<gateway>]
dhcp [on|release|renew]
pppoe
<username> <password>
[svname 0|1
<service_name>]
<auth_type> <mppe>
<mtu_value> dynwan
dynpppoe [connect 0|1
<timeout>|2]
pptp
<ip [server_ip]|url
[server_url]> <username>
<password> <auth_type>
<mppe> <mtu_value>
[static <ip_addr>
<netmask>
<gateway>|dynamic]
l2tp
<ip [server_ip]|url
[server_url]> <username>
<password> <auth_type>
<mppe> <mtu_value>
[static <ip_addr>
<netmask>
<gateway>|dynamic]
<timeout>
auth_type: 0. PAP 1. CHAP 2.
MSCHAP 3. MSCHAP2
mppe: 0. none 1. 40bits 2.
56bits 3. 128bits
link [status|set <mode>]
protocol status
sys server access
icmp
<0:disabled|1:enabled>
passthruvpn
ipsec
<0:disabled|1:enabled>
passthruvpn
pptp
<0:disabled|1:enabled>
passthruvpn l2tp <0:disabled|1:enabled>
[Mode] Virtual Servers
ip
nat
server
disp