User`s manual

8. Bandwidth Control

AirLive AIRMAX2 User’s Manual

4. If you have defined a Policy already, please choose a Policy name. The “Out Rates”

will be automatically pasted from the Policy template. You cannot change the Out

Rates if you have chosen a Policy

5. If you want to define new Data Rate, please do not choose any policies. Then you can

enter the values in the “LAN”, “WLAN”, or “WAN” Out Rates.

6. Press “Save” to save settings

7. Reboot your AP.

* If you want to control the traffic flow between MAC addresses in the same interface,

please make sure both MAC addresses are configured for the MAC Bandwidth Control.

Please check this part to find out what IP addresses

are supported. It varies between each mode