User`s manual

8. Bandwidth Control
AirLive AIRMAX2 User’s Manual
64
data rate
8.2.2 Individual IP/MAC Control
The AP can set the maximum data rate for each IP or MAC addresses. This type of
Bandwidth Control is most suitable for outdoor AP in “AP” or “Gateway” mode.
8.3 What is “Out Rate”?
The “Output Rate” is the data speed out of an interface. There are 3 types Output Rate
supported by the AP
1. LAN Output Rate: This is the speed of the traffic out of the LAN port. In gateway mode,
the LAN Output Rate includes both the wired LAN and WLAN interface.
2. WLAN Output Rate: This is the speed of the traffic out of the Wireless LAN
3. WAN Output Rate: This is the speed of the traffic out of the WAN port. In WISP mode,
the WAN Output Rate also includes the WLAN interface.