User`s manual

6. System Configurations
AirLive AIRMAX2 User’s Manual
56
2. Select your time Zone
3. Select your NTP server
4. Click on “Apply Change”
6.4 Password Settings
System Configuration -> Password Settings
The AIRMAX2’s password protection is turned off by default. To enable password
protection or change password, just enter your username and password, and click on
“Apply Change” button.
6.5 System Management
System Configuration -> System Management
In this page, administrator can change the management parameters and disable/enable
management interface.
CLI (Command Line Interface):
You can enable or disable Telnet and SSH management interface from here.