User`s manual

4. Wireless Settings

AirLive AIRMAX2 User’s Manual

In this chapter, we will explain about the wireless settings in web management interface.

Please be sure to read through Chapter1’s Wireless Operation Mode and Chapter 3’s

“Introduction to Web Management” and “Initial Configurations” first.

Although router mode settings (WAN port, Virtual Server…etc) are part of the wireless

settings menu, they will be explained in Chapter 5.

4.1 About Wireless Modes

The AirMax2 has total of 9 operation modes to suit different application requirements. In

this section, we will explain how to change between wireless operation modes. For

explanation on each different operation mode, please read Chapter 1 section 1.4 first.

Below is the summary table for different wireless modes:

AirMax2WirelessOperationMode

Wireless Mode Radio WAN Application

Access Point AP None Hotspot (Indoor and Outdoor)

Client Client None WISP Client

WISP Router Client Wireless WISP Client Router

Bridge Bridge None Building to Building network

WDS Repeater AP + Client None

Extend distance of another WDS

AP/Router

Universal Repeater AP + Client None Extend distance of any AP Router

WISP + Repeater

AP + Client Wireless WISP 2-Way CPE (One radio only)

AP Router AP LAN Port Broadband Sharing

WDS Station Bridge None Bridge with SSID

To change between different wireless mode, please to go the “Wireless Settings” menu, on

the left hand side bar, you will see the “Wireless Mode” pull down menu which displays the

current operation mode.

4. Wireless Settings