User`s manual

5 Management Software Guide
Note: If a port is selected as a member port in a new VLAN group. This port will be removed from
the default VLAN group 01.
Note2: If you have mis-configured the VLAN and you can not enter into the switch’s management
utility. Please press the reset button on the left side of the front panel to factory reset the switch.
Port Mirror Configuration
The port mirror configuration is mainly used for diagnostic purpose. It allows the administrator to
listen to the traffic of other ports. In another words, it will copy the traffic from the mirrored port to
the mirroring port.
Adding a Mirroring Port
You can add a Mirroring port (Listening port) by “Right Clicking” the “Mirroring Ports” area.
Please see graph below
Adding a Mirrored Port
You can add a Mirrored port (Being listened) by “Right Clicking” the “Mirrored Ports” area. You
can choose the RX(receiving traff) Mirror and TX(sending traffic) Mirror separately. Please see
graphic below.
28
Ether-FSH2400NS Fast Ethernet Switch User’s Manual V1.0