User`s manual

5 Management Software Guide

Global Configuration Submenu

Global Configuration is used to configure the global port control registers. Press the Refresh button

to read the status of the registers. Press the Update button to set the registers as shown in this frame.

Broadcast Flow

This define whether to enable flow control for the broadcast packet

Loop Port Detection

You must enable this option first before the “Loop” LED function will work. If you want to use the

loop detection function, please enable this option and save settings to the switch. Once this function

is enabled, the Loop LED will light up when there is a loop formed in your network.

IGMP Snooping

Setting IGMP Snooping Control register and IP Multicast Router Port Discovery register. The

router port is displayed in the Switch Status -> Port Status menu.

Broadcast Storm Filter

The Switch will filter out the broadcast packets once it exceeds 5% of total traffic. You can choose

to enable or disable this option

Multicast Flow Control

This define whether to enable flow control for the multi-cast packet

Ether-FSH2400NS Fast Ethernet Switch User’s Manual V1.0