User`s manual

5 Management Software Guide
The port status includes port type, enabled status, link status, speed duplex, flow control, loop
detection, and the “Router Port” for the IGMP function.
MIB Information Submenu
The function of the MIB counter is to let users see the ongoing traffic of each port. Users can set to
monitor the Transmitting (TX), Receiving (RX), and diagnostic packets separately. Furthermore,
you can even choose to monitor all packets or just collision/error packets. Please remember to right
click each port to change units.
Start
Press this button to start counting packets
Stop
Press this button to stop Byte count
Clear
To clear the current content
Pause
Pause to see the current result.
To Change the Unit or Packet Type. Please right click
on any of the ports and make your
selection below:
19
Ether-FSH2400NS Fast Ethernet Switch User’s Manual V1.0