User`s manual

2 Preparation before Installation
The Front Panel
The front panel is where you can find the twenty-four 10/100Mbps station ports and the LED
indicators. For the technical specifications of the ports, please refer to Appendix A, Product
Specifications for detailed information. For information concerning LED indicators, please refer to
Chapter 4, LED Indicators.
Power LED
Station Por
t
LEDs
Station Por
t
s
DIAG LED
Fig. 2-2 Front Panel
Reset Button
The Ether-FSH2400NS Features a reset button that can restore the switch settings back to factory’s
default value. Please press this button if your management software have problem detecting the
switch or if the switch is not functioning correctly. The reset button is located on the right side of the
front panel
Fig 2-3 The Reset Button
The Rear Panel
The rear panel is where you can locate the power switch and AC power connector.
Power Switch
You can turn the power switch on /off to activate/deactivate the Switch. To turn on the Switch, press
the switch to the ON position. To turn off, press the switch to the OFF position.
5
Ether-FSH2400NS Fast Ethernet Switch User’s Manual V1.0