User`s manual

5. Troubleshooting
A
irLive DS-100 v2 User’s Manual
27
On
the DS-100 v2 keypad:
(1) After WIAS-3200N v2 reboots, press the Function button (left-down) for a while until
the Lock LED turns solid on. Now the keypad is locked.
(2) To unlock the keypad, press the Function button (left-down) for a while until the Lock
LED starts to blink.
(3) Select the Lock password digits one by one by pressing the PRE (-) or POS (+) buttons
and then pressing Enter button after each digit. After all the keys are input, the Lock
LED will turns off, which denotes the keypad is unlocked.
*N
ote: The default password for DS-100 v2 is “1111”.