Instruction manual

AM.11.100e edition 1.4
5
Safety Instructions, continued
Read the installation section of all system component manuals before installing
your equipment. A thorough understanding of system components and their
requirements will help you install the system safely and efficiently.
Failure to follow these safety procedures can result in personal injury or death.
• Allow only qualified personnel to install ADB and auxiliary equipment. Use only
approved equipment. Using unapproved equipment in an approved system may
void agency approvals and will void the Warranty.
• Make sure all equipment is rated and approved for the environment in which you
are using it.
• Follow all instructions for installing components and accessories.
• Install all electrical connections to local code provided they are not in contradiction
with the general rules.
• Use only electrical wire of sufficient gauge and insulation to handle the rated
current and voltage demand. All wiring must meet local codes.
• Route electrical wiring along a protected path. Make sure they will not be damaged
by moving equipment and animals (e.g. rodents).
• Protect components from damage, wear, and harsh environment conditions.
• Allow ample room for maintenance, panel accessibility (power products), and cover
removal (power products).
• Protect equipment with safety devices as specified by applicable safety
regulations.
• If safety devices must be removed for installation, install them immediately after
the work is completed and check them for proper functioning.
Installation