Instruction manual

AM.11.100e edition 1.4
Chapter 6: Ordering codes and Exploded View 44
Screws Overview
The table below gives for each screw used in this product , the reference on the
exploded view, the type of screw, the tool to use and the torque.
Screw Tool Torque
A1 (not supplied with the light)
Screw FT.HEX M10 x 25, SST, Hex Head
or
Screw FT.HEX 3/8”-16UNC X7/8”
Socket hex 17mm
or
Socket hex 9/16”
21 Nm /
190 Lb.in
B6 - 7100.08.563 -
HEX SCREW M6x16 DIN 933-A2-LOCK 2045 Socket head 10mm 3.5 Nm /
31 Lb.in
E5 - 7100.08.571 -
HEX SCREW M6x20 DIN 933-A2-LOCK 2045 Socket head 10mm 3.5 Nm /
31 Lb.in
E1, F7 - 7100.08.360 -
SCREW M4x10 DIN 7500CE-T-A2 Torx20 3.5 Nm /
31 Lb.in
F4 - 7100.10.190-
SCREW M5x10 DIN 965-T-A2-LOCK 2045 Torx25 2.5 Nm /
23 Lb.in
F9 - 4070.77.150 -
Pressure release screw 1.6 x 8 Flat 2.5 Nm/
23 Lb.in
Self-locking nut (M10) Socket hex 17mm
21 Nm /
190 Lbin
Screws delivered for installation of adapter ring on
deep base
Socket hex 17mm
or Socket hex 9/16”
21 Nm/
190 Lb.in
Important
information