Instruction manual

AM.11.100e edition 1.4
Chapter 4: Servicing in the Maintenance Base 32
How to replace the optical assembly, continued
Step Action
7
Reinstall a new support plate assy’ (E2) by means of 4 new screws E5.
Respect the keying pins and don’t forget the lock washers.
Refer to the table “Screws Overview” page 44 for the tool to use and the
torque to apply.
8
Introduce the lamp (E3) and secure with the lamp spring (E6)..
CAUTION: Never touch the bulb of the lamp with your bare fingers. It
would reduce the lifetime of the lamp considerably. Should it happen,
clean the bulb with methylated spirit.
Procedure