Instruction manual

AM.11.100e edition 1.4
Chapter 4: Servicing in the Maintenance Base 29
How to replace the outer lens
To replace a lens, proceed as follows:
Step Action
1
Open the light assembly (see page 25).
2
Unplug the lamps fast-on connectors from the terminal block (F1).
3
Pull out the lamp (E3) from underneath; take care for the lamp spring
(E6).
4
Unscrew the 4 screws (E5). Remove the lockwashers.
5
Remove the lamp support plate (E2) .
6
Unscrew the 4 screws (B6). Remove the lockwashers.
7
Remove the lens support plate (B5) and the lens gasket protection (B4)
Procedure
B2
B1
B3
B4
B5
B6
Lubricant
E5 E3
E6
E2