Instruction manual

AM.11.100e edition 1.4

Safety Instructions

This section contains general safety instructions for using your ADB equipment.

Some safety instructions may not apply to the equipment in this manual. Task- and

equipment-specific warnings are included in other sections of this manual where

appropriate. Note all warnings and follow all instructions carefully. Failure to do so

may result in personal injury, death, or property damage.

To use this equipment safely,

• refer to the International Standard IEC 61820 , Electrical installation for lighting and

beaconing of aerodromes - Constant current series circuits for aeronautical ground

lighting - System design and installation requirements,

and to the International Standard IEC 61821, Electrical installations for lighting and

beaconing of aerodromes - Maintenance of aeronautical ground lighting constant

current series circuits for instructions on safety precautions.

• observe all safety regulations. To avoid injuries, always remove power prior to

making any wire connections and touching any live part. Refer to the International

Standards IEC 61820 & IEC 61821.

• read and become familiar with the general safety instructions provided in this

section of the manual before installing, operating, maintaining, or repairing this

equipment.

• read and carefully follow the instructions given throughout this manual for

performing specific tasks and working with specific equipment.

• store this manual within easy reach of personnel installing, operating, maintaining,

or repairing this equipment.

• follow all applicable safety procedures required by your company, industry

standards, and government or other regulatory agencies.

• obtain and read Material Safety Data Sheets (MSDS) for all materials used.

Safety

precautions