Instruction manual

AM.11.100e edition 1.4
Chapter 2: Mounting and connection 18
How to mount the light assembly?, continued
Step Action
3
Slightly moisten the gasket with soapy water, to lubricate.
CAUTION: Never lubricate the gasket with silicone or any
other kind of grease. Avoid the use of soap containing
silicone or glycerine.
4
Connect the light by inserting its two-pole plug into the receptacle of
either the shallow base, the secondary cable or the transformer
5
Apply Loctite on the three first threads of the threaded holes in the
base.
CAUTION: Always use Loctite 2701 to fasten the light fixture on its
support.
6
Gently install the light fixture in the base or the adapter ring and press it
home.
CAUTION: Make sure not to drop the light assembly or to pinch the
wires when mounting the light on the adapter ring.
7
Make sure that the lock washers are mounted correctly-dents facing
upwards - to avoid denting the cover.
8
Torque down gradually the 2 screws (or self-locking nuts in case of a
stud-equipped base).
CAUTION: Make sure the screws are tightened with a torque of 21 Nm/
190 Lb.in .
How to mount
the light
assembly?
A1
A2