Instruction manual

AM.11.100e edition 1.4
Chapter 1: Product Information 13
Equipment data
Each unit is supplied completely assembled, tested and sealed, ready for
installation. The electrical connection is made via a cable assembly with
FAA L-823 style 2-pole plug. A labyrinth gasket is included.
The FTO light for 230V AC parallel supply is always supplied mounted on a
shallow base. (with dedicated extension housing the transformer).
Each unit is individually packed in a durable, cushioned and corrugated cardboard
box, labelled with ADB and ordering numbers.
At least one instruction manual is delivered per order.
For some applications, optional film disc cut-outs are available. They form an
electrical bypass over the lamp within 15 seconds after lamp failure. After a lamp
failure, the film disc cut-out must be replaced.
Ordering codes and reference data pertinent to the light fixture and its components
are listed in the tables from page 39 onwards.
All the inset lights used for a particular function look externally identical. The
differences between versions depend on the lens colour (E1) and lamp (E3). Make
sure to use the correct version when installing the light onto its base.
Beyond the light itself, some equipment is required for installation and
maintenance.
This equipment is not supplied with the light but can be obtained through ADB.
It is listed on page 48.
Equipment
supplied
Film disc cut-
out
References
Differences
between
versions
Equipment
required for
installation and
maintenance