Instruction manual

AM.11.100e edition 1.4
Chapter 1: Product Information 12
General information
The ADB FTO inset lights are light fixtures providing optimum visual guidance with
minimal maintenance, low life-cycle costs and maximum reliability. It is designed to
withstand the high impact and roll-over loads imposed by today's widebody aircraft
during taxiing operations while remaining waterproof and serviceable.
The FTO fixture is shipped ready for installation on an ADB 8" shallow base or on
12” shallow base or FAA deep bases (L-867 size B or L-868 size B) with an
adapter ring
The ADB heliport inset lights type FTO are intended to use as omni directional light
for:
• Final approach and take-off area (for this model refer to manual AM.03.441);
• Touch-down and lift-off area (TLOF).
________________________________________________________________
This manual describes procedures for the installation, maintenance and
troubleshooting of the FTO heliport inset light for TLOF application. For other
applications of the FTO, please refer to Instuction Manual AM.03.441.
This manual covers the FTO light fixture for TLOF application manufactured in
accordance with FAA specification AC 150/5345-46 (except for photometry when it
differs from ICAO Annex 14) and compliant to ICAO Annex 14.
FTO Inset Lights
Purpose of this
manual
Scope of this
manual