User`s manual

4. Troubleshooting
AirLive Air4G User’s Manual 69
4
4. Troubleshooting
This Chapter provides solutions to problems for the installation and operation of theAir4G.
You can refer to the following if you are having problems.
1 Why can’t I configure the router even the cable is plugged and the LED is lit?
Do a Ping test to make sure that the WiFi Combo Router is responding.
Note: It is recommended that you use an Ethernet connection to configure it.
Go to Start > Run.
1. Type cmd.
2. Press OK.
3. Type ipconfig to get the IP of default gateway.
4. Type “ping 192.168.1.254”. Assure that you ping the correct IP Address
assigned to theAir4G. It will show four replies if you ping correctly.