Installation Manual

MN-772

WirelessAIR

M1 M2 DN UP

NAV

PAD

g. 22

QUICK FUNCTION REFERENCE

Normal Mode Functions Button(s) Required

Awake from Sleep Mode Any Button

Increase pressure (10 PSI both springs)

Decrease pressure (10 PSI both springs)

Save desired pressure to memory M1 or M2 (hold)

Recall Memory M1 or M2 (tap)

Select spring to change pressure NAV PAD Left or Right

Increase desired pressure NAV PAD Up

Increase desired pressure NAV PAD Dn

Settings Mode Functions

Enter Settings Mode UP and DN Buttons

Select the Flashing Setting Mode M1

Exit Settings M2

Adjusting Unit of Pressure

Select the Flashing “PS bA” M1

Change between (PSI/BAR) UP or DN Buttons

Exit to Settings Main M2

Joining Mode

Select the Flashing “JOIN” M1

Change between front and rear axle UP or DN Buttons

Select JOIN to selected Axle M1

Exit Join Mode M2

Table 1