Installation Manual

MN-772

WirelessAIR

SETTINGS MODE

In the settings mode the user can adjust the unit of measure, and join the manifolds with

the controller. To enter and exit the settings mode, press the UP and DN buttons together.

• In the settings mode the display will display “ACC” on the top left corner to indicate

settings mode.

• The UP arrow will scroll through the different options in the settings menu.

• The options will ash in the settings menu, and be permanently on when the

option is selected.

• Join option

• When the word “Join” is ashing press the M1 button to enter the Join menu.

• See Joining section for more information.

• Press the M2 button to exit back to the Settings main menu.

Join Menu

• Changing the unit of Pressure setting option.

• When the “PS BA” is ashing on the display press the M1 button to adjust the

unit of measure.

Adjusting the pressure units

• The “PS BA” will now stop ashing.

• Pressing the M1 button will now toggle the unit of measure for the pressure between

PSI and BAR.

• The unit of measure will be displayed in the bottom right corner of the LCD.

• Press the M2 button to exit and return to the Settings main menu.

Setting the pressure units

g. 17

g. 18

g. 19