Installation Manual

13
MN-772
WirelessAIR
Increasing Pressure
• Pressing the NAV PAD up button will increase the desired pressure by 1 PSI, or
0.1BAR depending on the unit of measure selected.
• Pressing the UP button will increment both left and right springs by 10 PSI or 1.0
BAR depending on the unit of measure selected.
• The controller will send the new desired pressure 2 seconds after the pressure has
not been changed by the user.
• The compressor icon will be active to indicate when the compressor is running.
LCD with compressor not active (both springs selected)
LCD with compressor active (lling both springs)
Decreasing pressure
• Pressing the NAV PAD down button will decrease the desired pressure by 1 PSI, or
0.1BAR depending on the unit of measure selected.
• Pressing the DN button will increment both left and right springs by 10 PSI or 1.0
BAR depending on the unit of measure selected.
• The controller will send the new desired pressure 2 seconds after the pressure has
not changed by the user.
• The arrow in the middle of the display indicates when the manifold is exhausting
the air springs.
LCD with exhaust not active (both springs selected)
LCD with exhaust active (both springs selected)
g. 11
g. 12
g. 13
g. 14