Specifications
36
36 36
36 QUICK-STICK™ Hand Held Control
HANDHELD CONTROL
1.
1.1.
1.
Depending on how the truck side plow harness is wired, the Quick
Depending on how the truck side plow harness is wired, the QuickDepending on how the truck side plow harness is wired, the Quick
Depending on how the truck side plow harness is wired, the Quick-
--
-Stick may operate with the ignition
Stick may operate with the ignition Stick may operate with the ignition
Stick may operate with the ignition
switch in the ON or OFF position. Please consult with your installer.
switch in the ON or OFF position. Please consult with your installer.switch in the ON or OFF position. Please consult with your installer.
switch in the ON or OFF position. Please consult with your installer.
2.
2.2.
2.
Turn the ON/OFF switch on the control to the ON position. The control keypad will glow green, indi-
Turn the ON/OFF switch on the control to the ON position. The control keypad will glow green, indi-Turn the ON/OFF switch on the control to the ON position. The control keypad will glow green, indi-
Turn the ON/OFF switch on the control to the ON position. The control keypad will glow green, indi-
cating the control is on. NOTE: THE ON/OFF SWITCH CAN BE USED AS AN EMERGENCY STOP
cating the control is on. NOTE: THE ON/OFF SWITCH CAN BE USED AS AN EMERGENCY STOP cating the control is on. NOTE: THE ON/OFF SWITCH CAN BE USED AS AN EMERGENCY STOP
cating the control is on. NOTE: THE ON/OFF SWITCH CAN BE USED AS AN EMERGENCY STOP
WHEN REQUIRED.
WHEN REQUIRED.WHEN REQUIRED.
WHEN REQUIRED.
3.
3.3.
3.
To control the plow, press the corresponding buttons on the keypad.
To control the plow, press the corresponding buttons on the keypad.To control the plow, press the corresponding buttons on the keypad.
To control the plow, press the corresponding buttons on the keypad.
4.
4.4.
4.
To engage the FLOAT Mode, press the down button for 1.3 seconds. The FLOAT indicator light, lo-
To engage the FLOAT Mode, press the down button for 1.3 seconds. The FLOAT indicator light, lo-To engage the FLOAT Mode, press the down button for 1.3 seconds. The FLOAT indicator light, lo-
To engage the FLOAT Mode, press the down button for 1.3 seconds. The FLOAT indicator light, lo-
cated in the center of the keypad (logo), will change from green to red. To cancel the FLOAT mode,
cated in the center of the keypad (logo), will change from green to red. To cancel the FLOAT mode, cated in the center of the keypad (logo), will change from green to red. To cancel the FLOAT mode,
cated in the center of the keypad (logo), will change from green to red. To cancel the FLOAT mode,
momentarily press the UP button. FLOAT mode will automatically cancel after 17 minutes and the
momentarily press the UP button. FLOAT mode will automatically cancel after 17 minutes and the momentarily press the UP button. FLOAT mode will automatically cancel after 17 minutes and the
momentarily press the UP button. FLOAT mode will automatically cancel after 17 minutes and the
FLOAT indicator light will turn back to green. To restart FLOAT mode, repeat step 4.
FLOAT indicator light will turn back to green. To restart FLOAT mode, repeat step 4.FLOAT indicator light will turn back to green. To restart FLOAT mode, repeat step 4.
FLOAT indicator light will turn back to green. To restart FLOAT mode, repeat step 4.
BLADE OPERATION TIME OUTS
All control functions automatically time out (shut off) after a period of time. This helps reduce wear on the
All control functions automatically time out (shut off) after a period of time. This helps reduce wear on the All control functions automatically time out (shut off) after a period of time. This helps reduce wear on the
All control functions automatically time out (shut off) after a period of time. This helps reduce wear on the
pump motor and prevent unnecessary battery drain. The UP function will time out after 2.6 seconds,
pump motor and prevent unnecessary battery drain. The UP function will time out after 2.6 seconds, pump motor and prevent unnecessary battery drain. The UP function will time out after 2.6 seconds,
pump motor and prevent unnecessary battery drain. The UP function will time out after 2.6 seconds,
while the LEFT and RIGHT functions will time out after 3.0 seconds.
while the LEFT and RIGHT functions will time out after 3.0 seconds.while the LEFT and RIGHT functions will time out after 3.0 seconds.
while the LEFT and RIGHT functions will time out after 3.0 seconds.
AUTOMATIC SHUTDOWN
After being idle for approximately 22 minutes, the control will automatically turn off and the indicator light
After being idle for approximately 22 minutes, the control will automatically turn off and the indicator light After being idle for approximately 22 minutes, the control will automatically turn off and the indicator light
After being idle for approximately 22 minutes, the control will automatically turn off and the indicator light
located at the center of the keypad (logo) will blink from red to green. To restart the control, turn the con-
located at the center of the keypad (logo) will blink from red to green. To restart the control, turn the con-located at the center of the keypad (logo) will blink from red to green. To restart the control, turn the con-
located at the center of the keypad (logo) will blink from red to green. To restart the control, turn the con-
trol OFF (ON/OF switch) and then back ON.
trol OFF (ON/OF switch) and then back ON.trol OFF (ON/OF switch) and then back ON.
trol OFF (ON/OF switch) and then back ON.
SO
Th
ThTh
Th
an
anan
an
(L
Manual.pub
tile 1 of page 38
Cyan
Magenta
Yellow
Black
Cyan
Magenta
Yellow
Black
Friday, November 17, 2006 12:29