Specifications

ManualsBrandsAir-Flo ManualsAutomotiveQuick-Silver

26 26

26 QUICK-SILVER™

GENERAL MAINTENANCE

! To reduce friction and wear between moving parts, inspect the

overall condition of the complete snow plow on a regular basis.

• Lubricate all shafts, pivots, and cam lock hitches with low temperature grease.

Lubricate all shafts, pivots, and cam lock hitches with low temperature grease.Lubricate all shafts, pivots, and cam lock hitches with low temperature grease.

Lubricate all shafts, pivots, and cam lock hitches with low temperature grease.

• To ensure proper connection and conductivity, clean plow harness ends with brake cleaner, coat

To ensure proper connection and conductivity, clean plow harness ends with brake cleaner, coat To ensure proper connection and conductivity, clean plow harness ends with brake cleaner, coat

To ensure proper connection and conductivity, clean plow harness ends with brake cleaner, coat

contacts with white lithium or dielectric grease and place weather caps on

contacts with white lithium or dielectric grease and place weather caps on contacts with white lithium or dielectric grease and place weather caps on

contacts with white lithium or dielectric grease and place weather caps on both

bothboth

both

plow

plow plow

plow-

-side and

side and side and

side and

truck

trucktruck

truck-

-side when not in use. Air

side when not in use. Airside when not in use. Air

side when not in use. Air-

-Flo Manufacturing recommends this procedure be completed on the

Flo Manufacturing recommends this procedure be completed on the Flo Manufacturing recommends this procedure be completed on the

Flo Manufacturing recommends this procedure be completed on the

snow plow harness, both plow

snow plow harness, both plowsnow plow harness, both plow

snow plow harness, both plow-

-side and truck

side and truckside and truck

side and truck-

-side plugs, every 25 hours. All other connections need

side plugs, every 25 hours. All other connections need side plugs, every 25 hours. All other connections need

side plugs, every 25 hours. All other connections need

to be serviced every 100 hours.

to be serviced every 100 hours.to be serviced every 100 hours.

to be serviced every 100 hours.

• Hydraulic hoses, hose ends, connectors, cylinders, and wiring connectors need to be inspected

Hydraulic hoses, hose ends, connectors, cylinders, and wiring connectors need to be inspected Hydraulic hoses, hose ends, connectors, cylinders, and wiring connectors need to be inspected

Hydraulic hoses, hose ends, connectors, cylinders, and wiring connectors need to be inspected

periodically. Any excessive wear or damage requires replacement of all affected components.

periodically. Any excessive wear or damage requires replacement of all affected components.periodically. Any excessive wear or damage requires replacement of all affected components.

periodically. Any excessive wear or damage requires replacement of all affected components.

• Before the start of each plowing season, it is recommended to change pump fluid using a Dexron

Before the start of each plowing season, it is recommended to change pump fluid using a Dexron Before the start of each plowing season, it is recommended to change pump fluid using a Dexron

Before the start of each plowing season, it is recommended to change pump fluid using a Dexron

automatic transmission fluid. Also installation of the plow and activation of the pump at least once

automatic transmission fluid. Also installation of the plow and activation of the pump at least once automatic transmission fluid. Also installation of the plow and activation of the pump at least once

automatic transmission fluid. Also installation of the plow and activation of the pump at least once

during the unused months is recommended.

during the unused months is recommended.during the unused months is recommended.

during the unused months is recommended.

• To avoid rust or corrosion, any paint chips on the plow frame should be touched up with black paint.

To avoid rust or corrosion, any paint chips on the plow frame should be touched up with black paint.To avoid rust or corrosion, any paint chips on the plow frame should be touched up with black paint.

To avoid rust or corrosion, any paint chips on the plow frame should be touched up with black paint.

• Check all hardware, including nuts, bolts, pins, springs, and spring hardware, making sure they are

Check all hardware, including nuts, bolts, pins, springs, and spring hardware, making sure they are Check all hardware, including nuts, bolts, pins, springs, and spring hardware, making sure they are

Check all hardware, including nuts, bolts, pins, springs, and spring hardware, making sure they are

tight and in good condition. Replace any damaged, worn, or broken hardware or components

tight and in good condition. Replace any damaged, worn, or broken hardware or components tight and in good condition. Replace any damaged, worn, or broken hardware or components

tight and in good condition. Replace any damaged, worn, or broken hardware or components

immediately.

immediately.immediately.

immediately.

• Check pump reservoir regularly for proper fluid level. Fluid level should be approximately 1/2” b elow

Check pump reservoir regularly for proper fluid level. Fluid level should be approximately 1/2” b elow Check pump reservoir regularly for proper fluid level. Fluid level should be approximately 1/2” b elow

Check pump reservoir regularly for proper fluid level. Fluid level should be approximately 1/2” b elow

bottom of filler neck.

bottom of filler neck. bottom of filler neck.

bottom of filler neck. DO NOT OVERFILL.

DO NOT OVERFILL.DO NOT OVERFILL.

DO NOT OVERFILL.

•

Manual.pub

tile 1 of page 28

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Friday, November 17, 2006 12:29