Specifications

9
99
9
INITIAL JACK STAND SETTINGS
INITIAL JACK STAND SETTINGSINITIAL JACK STAND SETTINGS
INITIAL JACK STAND SETTINGS
NOTE: Truck receiver height and plow hitch extensions (#10)should be aligned level. Any variance can be eliminated with
NOTE: Truck receiver height and plow hitch extensions (#10)should be aligned level. Any variance can be eliminated with NOTE: Truck receiver height and plow hitch extensions (#10)should be aligned level. Any variance can be eliminated with
NOTE: Truck receiver height and plow hitch extensions (#10)should be aligned level. Any variance can be eliminated with
the jack stand.
the jack stand.the jack stand.
the jack stand.
1. From a level surface, measure from the ground to any reference point on the plow mount attached to the truck.
1. From a level surface, measure from the ground to any reference point on the plow mount attached to the truck. 1. From a level surface, measure from the ground to any reference point on the plow mount attached to the truck.
1. From a level surface, measure from the ground to any reference point on the plow mount attached to the truck.
Note measurement.
Note measurement. Note measurement.
Note measurement.
2. Attach the plow to the truck. Lower the jack stand, and then lower the plow.
2. Attach the plow to the truck. Lower the jack stand, and then lower the plow.2. Attach the plow to the truck. Lower the jack stand, and then lower the plow.
2. Attach the plow to the truck. Lower the jack stand, and then lower the plow.
3. Take the same measurement as in step 1. Note any difference in height.
3. Take the same measurement as in step 1. Note any difference in height.3. Take the same measurement as in step 1. Note any difference in height.
3. Take the same measurement as in step 1. Note any difference in height.
4. Crank the jack stand up or down to restore truck chassis to original height noted in Step 1. Once the initial setting is
4. Crank the jack stand up or down to restore truck chassis to original height noted in Step 1. Once the initial setting is4. Crank the jack stand up or down to restore truck chassis to original height noted in Step 1. Once the initial setting is
4. Crank the jack stand up or down to restore truck chassis to original height noted in Step 1. Once the initial setting is
done on the jack stand, little or no adjustment is needed for future plow operations.
done on the jack stand, little or no adjustment is needed for future plow operations. done on the jack stand, little or no adjustment is needed f
or future plow operations.
done on the jack stand, little or no adjustment is needed for future plow operations.
Manual.pub
tile 1 of page 11 Cyan Magenta Yellow Black
Cyan Magenta Yellow Black
Friday, November 17, 2006 12:29