Owner`s manual

REMOTE CONTROLLER FUNCTIONS AND SETTINGS
5
REMOTE CONTROL:
Controls all of the
available functions of your
system with convenience
from a remote distance.
Wall unit beeps each time
to indicate a signal was
received from the remote.
LCD DISPLAY:
Displays current settings
on the remote.
Insert Two AAA Batteries.
IMPORTANT WARNING - SETTING THE REMOTE FOR
INITIAL USE AND AFTER REPLACING BATTERIES.
REMOTE CONTROL
CAN BE SET AS COOL
ONLY OR HEAT-COOL.
When the batteries are inserted, LCD screen will flash signs
next to HEAT and COOL alternately. Pressing any button while
the COOL sign is flashing sets the remote as Cool Only.
Pressing any button while HEAT sign is flashing sets as Heat-
Cool. If you do not press any button, flashing stops and
controller sets up as default to Heat-Cool Function..
Some systems are packed with a plastic wall holder for the remote controller. This part can
be bolted onto a wall to store the remote controller inside at a convenient location.