Owner`s manual

INDOOR UNIT DISPLAY
4
EMERGENCY START AND AUTO-RESTART FUNCTIONS
Location of the Emergency Start Button
009 and 012 Models 018 and 024 Models
EMERGENCY START-STOP:
If the remote transmitter is lost, the system
can be used in Emergency Mode by using
the Emergency Start Button.
a. Press the Emergency Start button once
to place the system into FORCED
COOLING mode (single short beep).
b. Press the Emergency Start button once
more to place the system into FORCED
HEATING mode (two short beeps).
c. Press the Emergency Start button
once to turn the system OFF (single
long beep).
After 30 minutes of running any forced
mode, system automatically will switch
to FEEL Mode (Explained later).
AUTO RESTART FUNCTION:
Following a power failure or brownout, the
system settings stay stored in the memory
and the system restarts automatically and
operates using the latest settings.
Factory default setting for Auto Restart
Function is ON.
a. To turn OFF the auto restart function,
disconnect the power to the system, then
reconnect power while holding down
Emergency Start button. Keep the button
pressed for 10 seconds more, until hearing
four short beeps.
b. To turn the auto restart function back ON
again, repeat the same procedure as
outlined above, until hearing three short
beeps.