User's Handbook

Adjusting butt pad.

The butt pad on the MPR can be adjusting in the vertical plane by loosening screw ‘K’, and

sliding the pad into position then re-tightening screw ‘K’. Fig 28.

Spacers can be added in between the butt pad assembly and the butt stock to lengthen the stock.

This can be achieved by moving the rubber pad up or down to expose screw ‘L’, Fig 29 at the top and

bottom of the butt pad assembly.

Loosening these screw will allow a spacer (available from Air Arms) to be place into the assem-

bly.