User's Handbook

It can be easier to adjust the trigger with the action out of the stock. To remove the stock first
remove the clamp screw for the fore-end, screw 6. Then remove the 2 stock screws in the side of the
rifle and the single screw from the bottom. The side screws require a 3mm allen key and the bottom
screw requires a 4mm allen key. The action can then be lifted clear of the stock. Be careful not to
drop the fore end clamp piece onto the wood as this item will now be loose in the action.
To refit the stock is the reverse process. Remember to insert the clamp piece before inserting
the action into the wood. Care also needs to be taken not to damage the wood as the action may be a
tight fit.