User Manual

User Manual
Product Model:AD801
Used by families and medical departments when measuring body temperature
●Strong environmental temperature adaptability, which can still be used
normally in complex environment;
● New control probe structure to ensure more accurate measurement;
● Two measurement modes of body temperature and object temperature, one
button mode switching operation is convenient and practical;
● Fever alarm prompt, backlight color prompt;
● Automatically save 16 sets of temperature measurement values;
● Large size LCD screen, high brightness three color backlight, clear and soft
display;
● Two temperature units of Celsius and Fahrenheit can be selected;
● Automatic shutdown saves power and energy;
● Simple and clear operation mode.
Please read this manual carefully before use, and make sure the battery is
installed
It is forbidden to immerse the forehead temperature gun in any liquid, and it is
forbidden to use it in an excessively high or low temperature environment for a
long time. It is forbidden to collide, fall, mix with sharp objects, and dismantle by
yourself
Do not use in strong electromagnetic interference environment
Put the forehead temperature gun out of the reach of children. The
measurement results can't replace the doctor's diagnosis.
Scope of application
Product features
Precautions
1
Technical parameters
Product performance, major structural components
2
Measuring Accuracy
Measuring range
For human body temperature measurement
34℃~42.9℃(93.2℉~109.2℉)
For Object surface temperature measurement
0℃ ～100℃(32℉ ～212.0℉)
Object surface temperature
±1.0℃/ 1.8℉
Operating ambient
temperature
0℃ ～42℃(32℉ ～ 107.6℉)
RH≤85%(under non-condensing conditions)
Storage ambient
temperature
-10℃ ～55℃（14℉ ～131℉ ）
RH≤85%（ Under non-condensing conditions）
Power Supply DC1.5V*2 (2 pcs AAA battery)
Battery status Low battery warning
Memory function Memorize 16 measurements
Display Unit
Celsius temperature（℃）
/ Fahrenheit temperature（℉）
Automatic shutdown
Automatic shutdown with no action in 30 seconds
Product Measurements 149mmX77mmX43mm (Length x Width x Height)
Product Measurements
Annex
104g
1 User Manual, 1 Quality Certificate
Human body temperature measurement
Within (35-42)℃
±0.2℃/ 0.4℉
Above (35-42)℃
±0.3℃/ 0.54℉
Measuring distance 3cm～5cm
This product measures the body temperature by collecting the infrared thermal
radiation from the human forehead and hair. Its operation is simple and sanitary,
and its measurement is fast and accurate. The user only needs to point the
detector head at the forehead and press the measurement key. In one second,
the user can quickly and accurately measure the body temperature, which can
be used by families and medical departments to measure the body
temperature.
This product is a class II medical device, belonging to the internal power supply
equipment, type B application part, and the protection grade is common
equipment (IP20). It can not be used under the mixture of flammable anesthetic
gas, nitrous oxide and other gases, and it is a continuous operation equipment.
The EU is classified as IIB.
The product is mainly composed of infrared temperature sensor, signal
receiving processor, key, buzzer, LCD display, battery, etc
1. Infrared detector
2. LCD
3. Button down
4. Button up
5. Set button
6. Switch
7. Battery cover
3
Installation and use instructions
Display icon definition
16 sets of body temperature memory data queries
Function Key Description
On the boot state, press the "up" or "down" button, LCD display the first memory
value; each click the "+" or "-" button, display the memory number plus 1 or
minus 1, a total of 16 groups of memory data.
4
Instructions for use
Battery replacement
Memory symbol
Display value
Display Unit
℉
M
℃
Fahrenheit temperature
It will show the measured temperature information.
Temperature
measurement mode
Tone
Electricity indication
Icon Icon definition State description
Display
Display and
flashing
No display
The battery power is low and can only work
for a short time. Please replace the battery.
The battery is too low to work properly.
Please replace the battery immediately
Full charged
Display
No display
Object Surface temperature measuring mold
Body temperature measuring mold
Buzzer sound on, with prompt sound
Buzzer sound off, no prompt sound
Celsius temperature
Display value is memory value and group number
Function key
SET
+
-
Function description
Enter / exit the menu and switch the setup items
Select the confirmation item to look up the measured value
Select the confirmation item to look down the measured value
LCD Dispaly
Function
setting key