User manual

93 Version 1.0
3.6.6 Time
The System time is the time used by MT4205 for scheduling services. You can manually
set the time or connect to a NTP (Network Time Protocol) server. If a NTP server is set,
you will only need to set the time zone. If you manually set the time, you may also set
Daylight Saving dates and the system time will automatically adjust on those dates.
1. Local Time: The default time within.
2. Default NTP Server: Select the NTP Server from the drop-down list.
3. Time Zone: Select your time zone location from the drop-down list.
4. Daylight saving time: If you are in daylight saving time area, please enable this item.
5. Set the Time: Select this item to set up time by manual, select the date and time from
each drop-down list.
6. Set Time: Select User Setup and click Set Time to set local PC time on router.
7. Apply & Cancel