User manual

65 Version 1.0
1. MAC Filter Action: To deny or allow all MAC filter action.
2. Enable MAC Filter: Check enable or disable to apply MAC Filter function.
3. Enable Log: All packets between WAN and LAN will be logged.
4. Description: Enter the filter description into this blank.
5. MAC Address: Enter the MAC address manually that you want to filter.
6. Time Ranges: Apply MAC filter by setting time ranges.
7. Add, Apply & Cancel
After finish the above, click Add button to create the MAC configuration rule and add
the settings into the list table. Click on Apply button to save and Cancel button to
clear the settings on this page.
8. MAC filter list
Shows all filtered MAC information for administrator to edit or delete.
3.4.2.4 URL Filter
Keyword based URL (Uniform Resource Locator) filtering allows you to define one or
more keywords that should not appear in URL’s. Any URL containing one or more of these
keywords will be blocked. This is a policy independent feature i.e. it cannot be associated
to ACL rules. This feature can be independently enabled / disabled, but works only if
firewall is enabled.