User manual

53 Version 1.0
1. Wireless
Select AP/Bridge or WDS to allow or disallow the wireless operation.
2. Wireless Mode
This field indicates the 802.11g interface mode. ―802.11G‖ prevents the 802.11b clients
from accessing the router. ―802.11B/G‖ allows both 802.11b and 802.11g clients to
access the router. ―802.11B‖ will enable the network as an 802.11b wireless network. By
default, the mode is ―802.11B/G‖.
3. ESSID
You can use the default ESSID and radio channel unless more than one MT4205 or
access point is deployed in the same area. Under this situation, it is advised that you
should use a different ESSID and radio channel for each of MT4205 or access point in
order to distinguish from each other. All of MT4205s and your wireless LAN cards must
have the same ESSID to allow a wireless mobile client roaming inbetween. By default,
the ESSID is set to Wireless_Mobile_Router.
4. TxRate
Select the transmission rate for the network. The default setting is Auto.