User manual

35 Version 1.0
For selecting configuration utility in AP/Bridge wireless connection, the Channel 6 is the
default channel; all devices on the network must be set to the same channel to
communication on the network. The default TxPreamble setting is Long (if you use high
traffic networks should use the shorter preamble type). Authentication is the security
function to prevent the connection requests from unauthorized wireless clients. As the
Encryption Type, select WEP or WPA can protect your data from eavesdroppers, if you
do not need the encryption, select ―None‖ to skip the following setting.
For selecting configuration utility in WDS wireless connection, please refer to 3.3.3
Wireless for detail setting.
After checking each above blank and choose the suitable item as your demand, click on
Next button to proceed to next setting.
Notice: If use AP/Bridge as wireless connection to router, here suggests disabling the DHCP setup in LAN
Setup, please refer to 3.2.2 LAN.
3.2.4 Time Server Setup
The section provides time alteration. The Router keeps a record of the current date and
time, which is used to calculate and report various performance data, but changing the
Select AP/Bridge or WDS from drop-down list.
You can use the default ESSID unless
more than one AP/Router is deployed
in the same area. And it will show
when searching the wireless signal.