User manual

33 Version 1.0
 Always: Stay connected all the time. After the Quick Setup is finished, the Internet
connection is on automatically. If disconnection is detected, the system will carry on
re-connection immediately in order to stay online.
 Dial on Demand: Connect to the Internet when it is needed. After the Quick Setup is
finished, the Internet connection is on automatically. When it is idled for the set-value
(0~60 Minutes), the connection will be disconnected automatically. On the other hand,
setting up the value as 0 or leaving it blank works the same as the above, Always.
 Manual: Connect to the Internet by setting up each time. After the Quick Setup is
finished, user has to go to Network Configuration page to manually set up the
connection and disconnection.
If ISP provided you DNS information, please select Specify DNS Server IP; otherwise,
select No Default DNS Server.
Click on Next button to go on 3.2.2 LAN Setup.
3.2.2 LAN Setup
If you are using MT4205 with multiple PCs on your LAN, you must connect the LAN via
the Ethernet ports on the built-in Ethernet switch. You must assign a unique IP address to