User manual

32 Version 1.0
Please enter the account’s name and password which provided by your ISP, and then
click on Next button to go on 3.2.2 LAN Setup.
3.2.1.5 HSDPA/UMTS
If you are using HSDPA/UMTS (3.5G connection) as the WAN Type, please check
HSDPA/UMTS selection and fill in the required information as follows to directly access
Internet via connected 3.5G adapter. At this moment, Backup of Connection is not
available, for it is in use as the preferred—Always, Dial on demand or Manual. When 3.5G
signal cannot be reached, the system starts to search downward for 3/2.75/2.5G signals
until none existed.
PPTP Server IP, My WAN IP
and My WAN Subnet Mask
are all necessary inputs.
The fields on the left are required.