User manual

29 Version 1.0
IP connection is back during the next detection.
Click on Next button to go on 3.2.2 LAN Setup.
3.2.1.3 WAN Type – PPPoE
This option is typically used for DSL services. Choose PPPoE (Point to Point Protocol
over Ethernet) if your ISP uses PPPoE connection. Your ISP will provide you with a
username and password. MTU stands for Maximum Transmission Unit. For PPPoE
connections, you may need to change the MTU setting in order to work correctly with your
ISP. As Idle Time, it’s the amount of time of inactivity before disconnecting your PPPoE
session. Enter an Idle Time (in minutes) to define and period of time for which the Internet
connection is maintained during inactivity. If the Auto-reconnect enabled, the Router will
automatically connect to your ISP after your system is restarted, or if the connection is
dropped. If ISP provides you DNS information, please select Specify DNS Server IP;
otherwise, select No Default DNS Server.
Input it if requested by your ISP (Ex:
Wireless Mobile Router)
MAC address