User manual

26 Version 1.0
Quick Setup Instruction
 WAN Setup: Setup the connecting type provided by your ISP, 5 modes of WAN
connection are supported by MT4205–Static IP, Dynamic IP, PPPoE, PPTP and
HSDPA/UMTS.
 LAN Setup: Setup the IP Address for LAN and Group. If you are using the Router
with multiple PCs on your LAN, you must connect the LAN via the Ethernet ports on
the built-in Ethernet switch. You should also assign a unique IP address to each
device residing on your LAN.
 Wireless Setup: Define the Wireless Mode, ESSID, TxRate, Channel and other
wireless settings.
 Time Server Setup: Set time by NTP server or user defines.
 Password Setup: To change administrator’s password.
 USB Disk Management Setup: View the entire data folder inside each storage
devices, also can do formatting and disk partition.
 User Account Management Setup: Set maximum user number, account and right for
using personal services of your MT4205 for each user.
 Firewall Setup: To enable Firewall and set security level.
 QoS Setup: To enable/disable QoS setup.
 FTP Server Setup: To enable FTP server and set controlling rules.
 Printer Server Setup: To enable /disable server.
 Web Camera Setup: To enable Web camera function and set image format.
 Samba Server Setup: To enable Samba server for shared documents and printer.
3.2.1 WAN Setup (Internet Connection)
WAN is short for Wide Area Network. The WAN settings can be referred to as the Public
setting. All IP information in the WAN settings is public IP addresses which are accessible
on the Internet. MT4205 supports 5 connection types to WAN. Select one of the WAN
connection modes required by your ISP in the following Internet Connection Configuration
page, the WAN setup pages will vary depending on what kind of WAN Type you select.