User manual

215 Version 1.0
A: Check the DNS server settings on your PC. You should get the DNS servers
settings from your ISP. If your PC is running a DHCP client, remove any DNS IP
address setting. As the router assign the DNS settings to the DHCP-client-enabled
PC.
7. Q: MT4205 couldn’t save the setting after click on Apply button?
A: MT4205 will start to run after the setting finished applying, but the setting isn’t written
into memory. Here we suggest if you want to make sure the setting would be
written into memory, please reboot the device via Reboot under System
Management directory.
7.6 Wireless LAN
1. Q: Why couldn’t my wireless notebook work on-line after checking?
A: Generally, Wireless networks can sometimes be very complicated to set up,
particularly if you're dealing with encryption and products from different vendors.
Any number of variables can keep your workstations from talking to each other.
Let's go over some of more common ones.
For starters, verify that your router and your workstation are using the same SSID
descriptions. SSID acts as a password when a mobile device tries to connect to the
wireless network. The SSID also differentiates one WLAN from another, so all
access points and all devices attempting to connect to a specific WLAN must use
the same SSID. A workstation will not be permitted to connect to the network unless
it can provide this unique identifier. This is similar to the function of your network's
Workgroup or Domain name.
When you're experiencing conductivity problems, it is always best to keep things
simple. So next you are going to do is that, please disable any WEP encryption you
might have configured.
Successful implementation of encryption also includes the use of a shared key. A
HEX key is the most common, but other formats are also used. This key identifies
the workstation to the router as a trusted member of this network. Different
manufacturers can implement this key technology in ways that might prevent them
from working correctly with another vendor's products. So pay attention to detail is
going to be the key to a successful installation.