User manual

21 Version 1.0
Chapter 2 Hardware Installation
2.1 Diagram of Connecting Hardware to MT4205
MT4205 is a portable and convenient wireless solution for the traveling businessmen
delivering 802.11g wireless connectivity with a maximum wireless signal rate of up to
54Mbps. Use it in conference rooms, hotel rooms, or even at hotspots. The Wireless Pocket
Router/AP might be small in size, but is huge in functionality, supporting multiple operation
modes, including Access Point (AP) mode, Router mode, and Wireless Client mode. You
can switch among these modes easily by using MT4205's 3-way configuration slide switch.
Moreover, there are 2 USB port support with MT4205; user can plug the USB devices,
including Flash Disk, Web Camera, Printer and 3.5G USB Dongle.
Warning: Before sliding the switch modes, please power-off the router firstly. Moreover, please stay
over 5 seconds between power-off / power-on condition.
2.1.1 Router Mode Hardware Connection and Application
When MT4205 switches to Router Mode, there will be each WAN and LAN port existing, the
administrator can do the Quick Setup including WAN Setup, LAN Setup, Wireless Setup,
Time Server Setup, Password Setup, USB Disk Management Setup, User Account
Management Setup, Firewall Setup, QoS Setup, FTP Server Setup, Web Camera Setup,
Print Server Setup and Samba Server Setup.