User manual

191 Version 1.0
1. Update Firmware: Click Browse to browse the local hard drive and locate the
firmware used for update.
2. OK & Cancel
Click OK to confirm or Cancel to clear the setting on this page.
Notice: Before using a whole new disk, please format it on your PC first, so that it can be formatted on MT4205.
5.5.4 Profile Save
To back up the current configuration setting or load the backup data, also you can restore
MT4205 to default setting by this function.
1. Save Settings To PC: Click on Save button for saving the configuration setting into
assigned location.
2. Load Settings From PC: Click on ―Browse…‖ button for searching the saving