User manual

Version 1.1

【Step 4-1】

For getting IP automatically if you are one of the users under MT4205, please skip Use the

following IP address and then select Obtain an IP address automatically and Obtain

DNS server address automatically and then click on OK button.

【Step 4-2】

For getting IP manually in order to specify a Virtual Server, such as Print Server, FTP Server

and so on, please skip Obtain an IP address automatically and then select Use the

following IP address. And the following default setting of MT4205 should be noted:

 IP Address：192.168.1.10 (as your Print Server for example)

 Subnet Mask：255.255.255.0

 Default Gateway：192.168.1.1

Notice: If you configure your computer’s IP Address manually, it needs to be on the same

network segment.

For example:

 IP Address: 192.168.1.xxx (xxx can be any number between 2 and 253, but it can’t be

repeated, we use 100 to be the example.)

 Subnet Mask: 255.255.255.0

 Gateway: 192.168.1.1 (this is the IP address of MT4205 in Router Mode)

 DNS: 192.168.1.1 (use MT4205’s IP address or on your own choice)

Notice: IP address and Default gateway cannot be the same.